Difference between revisions of "CMS/DSS/Add Decoder"
(→Prerequisites) |
|||
| Line 8: | Line 8: | ||
* NVR/DVR | * NVR/DVR | ||
* Decoder | * Decoder | ||
| + | * A Connection to the DSS Server | ||
| + | * An Internet Connection | ||
| + | * DSS server IP address | ||
| + | |||
| + | Windows: | ||
| + | |||
| + | * Microsoft Windows XP SP3, Microsoft Windows 7 or above | ||
| + | * Core 2 dual-core 3.0Ghz or above | ||
| + | * At least 10GB free hard disk space or above | ||
| + | * directX 9.0c or above | ||
| + | * 2GB Memory or above | ||
| + | * 1024×768 resolution or above | ||
| + | * Internet explorer 7 or above | ||
===Video Instructions=== | ===Video Instructions=== | ||
Revision as of 16:00, 20 September 2016
Contents
How to Add a Decoder
Description
This is a guide for How to Add a Decoder.
Prerequisites
- DSS
- Connected network
- NVR/DVR
- Decoder
- A Connection to the DSS Server
- An Internet Connection
- DSS server IP address
Windows:
- Microsoft Windows XP SP3, Microsoft Windows 7 or above
- Core 2 dual-core 3.0Ghz or above
- At least 10GB free hard disk space or above
- directX 9.0c or above
- 2GB Memory or above
- 1024×768 resolution or above
- Internet explorer 7 or above
Video Instructions
Step by Step Instructions
Step 1. From the Main Menu select the General Tab ➞ Select Device ➞ Select Device ➞ Select Decoder ➞ Select Add
Step 2. Input required info ➞ Select "Getting Info"
- Input device name ➞ Input Channel Amount ➞ Select OK.
