Difference between revisions of "NVR/Basic Setup/Navigation Bar"
(→Output Screen) |
|||
| Line 20: | Line 20: | ||
====Output Screen==== | ====Output Screen==== | ||
| + | ===Output Screen=== | ||
| + | Select corresponding window-split mode and output channels. | ||
| + | |||
| + | ===Tour=== | ||
| + | Click button to enable tour, the icon becomes, you can see the tour is in process. | ||
| + | |||
| + | ===PTZ=== | ||
| + | Click, system goes to the PTZ control interface. Please refer to chapter 4.7.2. | ||
| + | |||
| + | ===Color=== | ||
| + | Click button, system goes to the color interface. Please refer to chapter 4.6.4.1. | ||
| + | |||
| + | Please make sure system is in one-channel mode. | ||
| + | |||
| + | ===Search=== | ||
| + | |||
| + | Click button, system goes to search interface. Please refer to chapter 4.9.2 | ||
| + | |||
| + | ===Alarm Status=== | ||
| + | Click button, system goes to alarm status interface. It is to view device status and channel status. Please refer to chapter 4.15.1.4. | ||
| + | |||
| + | ===Channel Info=== | ||
| + | Click button, system goes to the channel information setup interface. It is to view information of the corresponding channel. See Figure 4‑11. | ||
Revision as of 18:36, 23 October 2015
Contents
You need to go to the Main menu->Setting->System->General to enable navigation bar function; otherwise you can not see the following interface.
(This function is for some series only.)
Click 
to select screen 2, you can view an interface shown as below. This is a navigation bar for screen 2.
Click any screen split mode; HDMI2 screen can display corresponding screens. Now you can control two screens.
Note
- Screen 2 funciton is null if tour is in process. Please disable tour funciton first,
- Right now, the screen 2 operation can only be realized on the navigation bard. The operations on the right-click menu are for screen 1 only.
Output Screen
Output Screen
Select corresponding window-split mode and output channels.
Tour
Click button to enable tour, the icon becomes, you can see the tour is in process.
PTZ
Click, system goes to the PTZ control interface. Please refer to chapter 4.7.2.
Color
Click button, system goes to the color interface. Please refer to chapter 4.6.4.1.
Please make sure system is in one-channel mode.
Search
Click button, system goes to search interface. Please refer to chapter 4.9.2
Alarm Status
Click button, system goes to alarm status interface. It is to view device status and channel status. Please refer to chapter 4.15.1.4.
Channel Info
Click button, system goes to the channel information setup interface. It is to view information of the corresponding channel. See Figure 4‑11.
