Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "NVR/Basic Setup/Navigation Bar"
(→Output Screen) |
(→Output Screen) |
||
| Line 23: | Line 23: | ||
'''Tour''' | '''Tour''' | ||
| − | Click button to enable tour, the icon becomes, you can see the tour is in process. | + | Click button [[file:NVRNavBarIconTour.jpg]] to enable tour, the icon becomes[[file:NVRNavBarIconTour2.jpg]], you can see the tour is in process. |
'''PTZ''' | '''PTZ''' | ||
| − | Click, system goes to the PTZ control interface. | + | Click[[file:NVRNavBarIconPTZ.jpg]], system goes to the PTZ control interface. |
'''Color''' | '''Color''' | ||
| − | Click button, system goes to the color interface. | + | Click button[[file:NVRNavBarIconColor.jpg]], system goes to the color interface. |
Please make sure system is in one-channel mode. | Please make sure system is in one-channel mode. | ||
'''Search''' | '''Search''' | ||
| − | Click button, system goes to search interface. | + | Click button[[file:NVRNavBarIconSearch.jpg]], system goes to search interface. |
'''Alarm Status''' | '''Alarm Status''' | ||
| − | Click button, system goes to alarm status interface. It is to view device status and channel status. | + | Click button[[file:NVRNavBarIconAlarmStatus.jpg]], system goes to alarm status interface. It is to view device status and channel status. |
'''Channel Info''' | '''Channel Info''' | ||
| − | Click button, system goes to the channel information setup interface. It is to view information of the corresponding channel. | + | Click button[[file:NVRNavBarIconChannelInfo.jpg]], system goes to the channel information setup interface. It is to view information of the corresponding channel. |
'''Remote Device''' | '''Remote Device''' | ||
| − | Click , system goes to the remote device interface. | + | Click [[file:NVRNavBarIconRemoteDevice.jpg]], system goes to the remote device interface. |
'''Network''' | '''Network''' | ||
| − | Click , system goes to the network interface. It is to set network IP address, default gateway and etc. | + | Click [[file:NVRNavBarIconNetwork.jpg]], system goes to the network interface. It is to set network IP address, default gateway and etc. |
'''HDD Manager''' | '''HDD Manager''' | ||
| − | Click ， system goes to the HDD manager interface. It is to view and manage HDD information. | + | Click [[file:NVRNavBarIconHDDManage.jpg]]， system goes to the HDD manager interface. It is to view and manage HDD information. |
'''USB Manager''' | '''USB Manager''' | ||
| − | Click ， system goes to the USB Manager interface. It is to view USB information, backup and update. | + | Click [[file:NVRNavBarIconUSBManage.jpg]]， system goes to the USB Manager interface. It is to view USB information, backup and update. |
Revision as of 18:51, 23 October 2015
You need to go to the Main menu->Setting->System->General to enable navigation bar function; otherwise you can not see the following interface.
(This function is for some series only.)
Click 
to select screen 2, you can view an interface shown as below. This is a navigation bar for screen 2.
Click any screen split mode; HDMI2 screen can display corresponding screens. Now you can control two screens.
Note
- Screen 2 funciton is null if tour is in process. Please disable tour funciton first,
- Right now, the screen 2 operation can only be realized on the navigation bard. The operations on the right-click menu are for screen 1 only.
Output Screen
Select corresponding window-split mode and output channels.
Tour
Click button 
to enable tour, the icon becomes
, you can see the tour is in process.
PTZ
Click
, system goes to the PTZ control interface.
Color
Click button
, system goes to the color interface.
Please make sure system is in one-channel mode.
Search
Click button
, system goes to search interface.
Alarm Status
Click button
, system goes to alarm status interface. It is to view device status and channel status.
Channel Info
Click button
, system goes to the channel information setup interface. It is to view information of the corresponding channel.
Remote Device
Click 
, system goes to the remote device interface.
Network
Click 
, system goes to the network interface. It is to set network IP address, default gateway and etc.
HDD Manager
Click 
， system goes to the HDD manager interface. It is to view and manage HDD information.
USB Manager
Click 
， system goes to the USB Manager interface. It is to view USB information, backup and update.
