Difference between revisions of "NVR/Basic Setup/Smart Add"
| Line 2: | Line 2: | ||
====Accessing Smart Add==== | ====Accessing Smart Add==== | ||
*Method 1: From the startup wizard, click Smart add button. | *Method 1: From the startup wizard, click Smart add button. | ||
| + | |||
[[file:NVRSmartAdd1.png]] | [[file:NVRSmartAdd1.png]] | ||
| − | *Method 2: On the preview interface, right click mouse and then select Smart add. | + | |
| + | *Method 2: On the preview interface, right click mouse and then select Smart add. Now you can go to the smart add interface. | ||
| + | |||
[[file:NVRSmartAdd2.png]] | [[file:NVRSmartAdd2.png]] | ||
| − | + | ||
| − | [[file:NVRSmartAdd3.png]] | + | ====Smart Add Setup==== |
| + | [[file:NVRSmartAdd3.png|500px]] | ||
| + | |||
Click smart add button, you can see device enables DHCP function. | Click smart add button, you can see device enables DHCP function. | ||
| − | [[file:NVRSmartAdd4.png]] | + | |
| + | [[file:NVRSmartAdd4.png|500px]] | ||
| + | |||
System pops up the following interface for you to confirm IP information if there are several IP segments | System pops up the following interface for you to confirm IP information if there are several IP segments | ||
| + | |||
[[file:NVRSmartAdd5.png]] | [[file:NVRSmartAdd5.png]] | ||
| + | |||
Now you can see system is auto adding IPC to the corresponding channels. | Now you can see system is auto adding IPC to the corresponding channels. | ||
| + | |||
[[file:NVRSmartAdd6.png]] | [[file:NVRSmartAdd6.png]] | ||
| + | |||
You can see the following dialog box after system successfully added network cameras. | You can see the following dialog box after system successfully added network cameras. | ||
| + | |||
[[file:NVRSmartAdd7.png]] | [[file:NVRSmartAdd7.png]] | ||
Revision as of 19:14, 23 October 2015
Smart Add
Accessing Smart Add
- Method 1: From the startup wizard, click Smart add button.
Error creating thumbnail: Unable to save thumbnail to destination
- Method 2: On the preview interface, right click mouse and then select Smart add. Now you can go to the smart add interface.
Error creating thumbnail: Unable to save thumbnail to destination
Smart Add Setup
Click smart add button, you can see device enables DHCP function.
System pops up the following interface for you to confirm IP information if there are several IP segments
Error creating thumbnail: Unable to save thumbnail to destination
Now you can see system is auto adding IPC to the corresponding channels.
Error creating thumbnail: Unable to save thumbnail to destination
You can see the following dialog box after system successfully added network cameras.
Error creating thumbnail: Unable to save thumbnail to destination
