Difference between revisions of "NVRiSettingStorage"
(→Record) |
(→Record) |
||
| Line 15: | Line 15: | ||
* Channel: Please select the channel number first. You can select “all” if you want to set for the whole channels. | * Channel: Please select the channel number first. You can select “all” if you want to set for the whole channels. | ||
| − | * [[file:SyncIcon. | + | * [[file:SyncIcon.png]]: Sync connection icon. Select icon[[file:SelectIcon.png]] of several dates, all checked items can be edited or together. Now the icon is shown as[[file:SyncIcon.png]] |
* [[file:EraseIcon.png]]: Click it to delete a record type from one period. | * [[file:EraseIcon.png]]: Click it to delete a record type from one period. | ||
* Record Type: Please check the box to select corresponding record type. There are four types: Regular/MD (motion detect)/Alarm/MD&Alarm. | * Record Type: Please check the box to select corresponding record type. There are four types: Regular/MD (motion detect)/Alarm/MD&Alarm. | ||
Revision as of 18:19, 2 November 2015
Contents
NVR Interface-Setting-Storage
Schedule
Record
The record type priority is: Alarm>Motion>Regular
Schedule Record
Set record time, record plan and etc. Please note system is in 24-hour record by default after its first boot up.
In the main menu, from Main menu->Setting->Storage->Schedule, you can go to schedule menu. See Figure 4‑55. There are total six periods.
- Channel: Please select the channel number first. You can select “all” if you want to set for the whole channels.
- File:SyncIcon.png: Sync connection icon. Select icon
of several dates, all checked items can be edited or together. Now the icon is shown asFile:SyncIcon.png -
: Click it to delete a record type from one period. - Record Type: Please check the box to select corresponding record type. There are four types: Regular/MD (motion detect)/Alarm/MD&Alarm.
- Week day: There are eight options: ranges from Saturday to Sunday and all.
- Holiday: It is to set holiday setup. Please note you need to go to the General interface (Main Menu->Setting->System->General) to add holiday first. Otherwise you can not see this item.
- Pre-record: System can pre-record the video before the event occurs into the file. The value ranges from 1 to 30 seconds depending on the bit stream.
- Redundancy: System supports redundancy backup function. It allows you backup recorded file in two disks. You can highlight Redundancy button to activate this function. Please note, before enable this function, please set at least one HDD as redundant. (Main menu->Setting->Storage->HDD Manager). Please note this function is null if there is only one HDD.
- ANR: It is to save video to the SD card of the network camera in case the network connection fails. The value ranges from 0s～ After the network connection resumed, the system can get the video from the SD card and there is no risk of record loss.
- Period setup: Click button
after one date or a holiday, you can see an interface shown as in Figure 4‑56.There are four record types: regular, motion detection (MD), Alarm, MD & alarm.
Snapshot
HDD Manage
Record
Advance
HDD
Main Stream
Sub Stream
Snapshot
HDD Detect
Detect
Report
