Difference between revisions of "NVR/Recording Setup/Alarm Recording Setup SmartPSS 2.0"
(Created page with "==How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0== ===Description=== How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0 ===Step by St...") |
(→Description) |
||
| Line 3: | Line 3: | ||
===Description=== | ===Description=== | ||
How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0 | How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0 | ||
| + | |||
| + | ===Prerequisites=== | ||
| + | * A NVR or IP Camera with an Alarm Out | ||
| + | |||
| + | [[file:PhysicalAlarmRecordSetup8Large.JPG|600px]] | ||
| + | |||
| + | * A low voltage physical alarm | ||
| + | |||
| + | [[file:PhysicalAlarmRecordSetup1Large.JPG|600px]] | ||
| + | |||
| + | * Dual pair 24 gauge run to the physical alarm | ||
| + | |||
| + | [[file:PhysicalAlarmRecordSetup15Large.JPG|600px]] | ||
| + | |||
| + | * Alarm block | ||
| + | |||
| + | [[file:PhysicalAlarmRecordSetup6Large.JPG|600px]] | ||
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
Revision as of 18:39, 13 October 2017
Contents
How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0
Description
How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0
Prerequisites
- A NVR or IP Camera with an Alarm Out
- A low voltage physical alarm
- Dual pair 24 gauge run to the physical alarm
- Alarm block
Step by Step Instructions
1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"
2. Connect the cable to your physical alarm.
->
3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"
