Difference between revisions of "NVR/Basic Setup/Set IP Address"

(How to set IP address for configuring IP cameras)
(How to set IP address for configuring IP cameras)
Line 1: Line 1:
 
==How to set IP address for configuring IP cameras==
 
==How to set IP address for configuring IP cameras==
 
Connect a RJ45 cable from camera to NVR
 
Connect a RJ45 cable from camera to NVR
 +
[[File:first.jpg|none]]
 
Then connect a RJ45 cable from NVR to PC.
 
Then connect a RJ45 cable from NVR to PC.
 +
 
Go to wifi to be on the same network as the camera.
 
Go to wifi to be on the same network as the camera.
 
 
  
  
Line 11: Line 11:
 
Set the IP address of the laptop same as the camera.
 
Set the IP address of the laptop same as the camera.
  
 +
Here's how:
 +
[[File:second.jpg|none]]
 +
[[File:third.jpg|none]]
 +
[[File:fourth.jpg|none]]
 
Then you can proceed to configure the camera such as an firmware upgrade.
 
Then you can proceed to configure the camera such as an firmware upgrade.

Revision as of 20:24, 3 December 2015

How to set IP address for configuring IP cameras

Connect a RJ45 cable from camera to NVR

First.jpg

Then connect a RJ45 cable from NVR to PC.

Go to wifi to be on the same network as the camera.


Go and find the IP address of the camera using the config tool.

Set the IP address of the laptop same as the camera.

Here's how:

Second.jpg
Third.jpg

Then you can proceed to configure the camera such as an firmware upgrade.