Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "PTZ Pattern Setup"
Line 9: | Line 9: | ||
2.Select the down arrow to expand your PTZ Control Menu | 2.Select the down arrow to expand your PTZ Control Menu | ||
− | [[File:liveviewpage.png| | + | [[File:liveviewpage.png|800px]] |
3.Select Pattern from the drop down menu | 3.Select Pattern from the drop down menu | ||
− | [[File:selectpattern.png| | + | [[File:selectpattern.png|800px]] |
4.Select Start Record | 4.Select Start Record | ||
− | [[File:startrecording.png| | + | [[File:startrecording.png|800px]] |
5.Using the Arrows on the PTZ menu Draw the pattern you wish your PTZ to follow | 5.Using the Arrows on the PTZ menu Draw the pattern you wish your PTZ to follow |
Revision as of 16:19, 9 July 2019
HDCVI Pattern Tutorial
Description
How To Dewarp set up a pattern for your PTZ
Step by step instructions
1.Log into your device from its IP address in your web browser
2.Select the down arrow to expand your PTZ Control Menu
3.Select Pattern from the drop down menu
4.Select Start Record
5.Using the Arrows on the PTZ menu Draw the pattern you wish your PTZ to follow
6.Select Stop Record
Your pattern should now be applied to the Pattern number selected.