Difference between revisions of "New GUI/AI/Tripwire Setup"

Revision as of 17:30, 15 July 2019

How To Setup Tripwire

Description

This article will show you how to setup the tripwire IVS feature on a supported device

Prerequisites

• Supported device with tripwire feature

Video Instructions

Step by Step Instructions

1. Enter the Main Menu

• Right click at live view then select "Main Menu"

2. Click Smart Detection

3. Click Smart Plan

4. Click to Select IVS (Light Bulb icon)

When enabled the icon will highlight

Click Apply to save changes

6. Click Parameters

7. Use the dropdown box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

8. The created rule will appear in the list

9. Click the Pencil icon to draw the Tripwire rule

10. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the Trip line, then use the mouse to draw the trip line.

Right click to end drawing

11. The Tripwire menu will appear

• Name: A name can be applied to the rule
• Direction: Both, A To B, B To A

Click icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click icon to clear the current rule

Once the tripwire rule settings have been created click OK

12. Click the icon to set the Trigger settings when the IVS Tripwire rule is engaged.