Difference between revisions of "New GUI/AI/Missing Setup"
| Line 11: | Line 11: | ||
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
| − | 1. | + | 1. From the Main Menu click AI |
| − | + | [[File:How_To_Setup_Intrusion_-_NewUI_-_1.jpg|500px]] | |
| − | + | 2. Click Parameters > Smart Plan | |
| − | + | [[File:How_To_Setup_Intrusion_-_NewUI_-_2.jpg|500px]] | |
| − | + | 3. Use the drop down box to select the Channel | |
| − | + | [[File:How_To_Setup_Intrusion_-_NewUI_-_3.jpg|500px]] | |
| − | + | 4. Click the IVS icon to enable. | |
| − | + | [[File:How_To_Setup_Intrusion_-_NewUI_-_4.jpg|500px]] | |
| − | + | The icon will highlight when selected. | |
| − | + | Click Apply | |
| − | + | [[File:How_To_Setup_Intrusion_-_NewUI_-_5.jpg|500px]] | |
| − | + | 5. Click Parameters > IVS | |
| − | + | [[File:How_To_Setup_Intrusion_-_NewUI_-_6.jpg|500px]] | |
| − | + | 6. Use the drop-down box to select the Channel | |
| − | |||
| − | |||
Then click Add in the lower right side of the screen to Add an IVS rule | Then click Add in the lower right side of the screen to Add an IVS rule | ||
| − | [[File: | + | [[File:How_To_Setup_Intrusion_-_NewUI_-_7.jpg|500px]] |
8. The created rule will appear in the list | 8. The created rule will appear in the list | ||
| − | [[File: | + | [[File:How_To_Setup_Intrusion_-_NewUI_-_8.jpg|500px]] |
9. Use the dropdown box to change the Rule Type to "Missing" | 9. Use the dropdown box to change the Rule Type to "Missing" | ||
Revision as of 21:00, 7 August 2019
Contents
How To Setup Missing Object
Description
This article will show you how to setup the Missing Object IVS feature on a supported device
Prerequisites
- Supported device with Missing Object feature
Video Instructions
Step by Step Instructions
1. From the Main Menu click AI
2. Click Parameters > Smart Plan
3. Use the drop down box to select the Channel
4. Click the IVS icon to enable.
The icon will highlight when selected.
Click Apply
5. Click Parameters > IVS
6. Use the drop-down box to select the Channel
Then click Add in the lower right side of the screen to Add an IVS rule
8. The created rule will appear in the list
9. Use the dropdown box to change the Rule Type to "Missing"
10. Click the Pencil icon to draw the Missing Object rule
11. The Channel will fullscreen.
Left click anywhere inside the video frame to begin drawing the detection area for the object.
Right click to end drawing
12. You can use the Missing menu that appears for additional rule settings:
- Name: A name can be applied to the rule
- Period: Set a time (in seconds) for the Missing object rule to trigger
Click 
icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)
Click 
icon to clear the current rule
Once the tripwire rule settings have been created click OK
13. Click the 
icon to set the Trigger settings when the IVS Tripwire rule is engaged.
14. The Trigger menu will appear
- Period
- Alarm Out
- Snapshot
Once the trigger rule settings have been created click OK
15. Once all Tripwire settings have been configured, Click Apply in the lower right of the screen to save all changes
16. The created Missing rule is now programmed
