Difference between revisions of "NVR/Recording Setup/Zero Channel"

Revision as of 16:24, 6 January 2016

How to setup Zero Channel on Dahua NVR

Step 1: Please log into the DVR/NVR interface.

Step 2: Navigate to the System Menu

Step 3: Then go to the "Display" option

Step 4: Please look at the tabs at the top of the page and select "Zero Channel"

Step 5: You will be presented with some options to configure certain aspects of the

Zero Channel stream such as Compression, Resolution, Frame Rate & Bit Rate

Please see the video below on Zero Channel configuration:

How to setup Zero Channel on Dahua Web Service

Step 1: Setup Tab --> System --> Display.

Step 2: Zero-Channel --> Check "Enable".

@@ Line 24: / Line 24: @@
 [[File:Zero_Channel.gif|none]]
 '''How to setup Zero Channel on Dahua Web Service'''
 Step 1: Setup Tab --> System --> Display.
-Step 2: Zero-Channel --> Check Enable.
+Step 2: Zero-Channel --> Check "Enable".