Difference between revisions of "New GUI/AI/Abandoned Setup"

Revision as of 19:32, 7 August 2019

How To Setup Abandoned Object

Description

This article will show you how to setup the Abandoned Object IVS feature on a supported device

Prerequisites

• Supported device with Missing Object feature

Video Instructions

Step by Step Instructions

1. Enter the Main Menu

• Right click at live view then select "Main Menu"

2. Click Smart Detection

3. Click Smart Plan

4. Click to Select IVS (Light Bulb icon)

When enabled the icon will highlight

Click Apply to save changes

6. Click Parameters

7. Use the dropdown box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

8. The created rule will appear in the list

9. Use the dropdown box to change the Rule Type to "Abandoned"

10. Click the Pencil icon to draw the Missing Object rule

11. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the detection area for the object.

Right click to end drawing

12. You can use the Missing menu that appears for additional rule settings:

• Name: A name can be applied to the rule
• Period: Set a time (in seconds) for the Missing object rule to trigger

Click icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click icon to clear the current rule

Once the tripwire rule settings have been created click OK

13. Click the icon to set the Trigger settings when the IVS Tripwire rule is engaged.

14. The Trigger menu will appear

• Period
• Alarm Out
• Snapshot

Once the trigger rule settings have been created click OK

Once all Abandoned settings have been configured, Click Apply in the lower right of the screen to save all changes

15. The created Abandoned rule is now programmed