Difference between revisions of "New GUI/Instructions/Motion Record"

Line 1: Line 1:
−
=New GUI - Motion Record Setup=
+
=New GUI - Motion Detection Recording Setup=
  
 
==Description==
 
==Description==
−
This article will go over Motion Recording setup in detail on the recorder's new GUI
+
This article will go over Motion Detection Recording setup in detail on the recorder's new GUI
  
 
==Prerequisites==
 
==Prerequisites==
Line 10: Line 10:
 
==Step by Step Instructions==
 
==Step by Step Instructions==
  
−
1. On the main menu go to Management
+
1. On the main menu select '''Alarm'''
  
−
[[File:NGUIMotionRecord-1.jpg|900px]]
+
[[File:NewGUIMotionDetection1.png|1000px]]
  
−
2. Click on Camera
+
2. Select '''Video Detection''' on the left.
 +
<br>Then select the '''Motion Detection''' tab at the top.
 +
<br>Choose the channel from the drop-down next to '''Channel'''.
 +
<br>Check the box next to '''Enable'''.
 +
<br>Check the box next to '''Record Channel'''.
 +
<br>Click on '''Setting''' next to '''Region'''
  
−
[[File:NGUIMotionRecord-2.jpg|900px]]
+
[[File:NewGUIMotionDetection2.png|1000px]]
  
−
3. Under Camera select "Video Detect" to enter the Motion Detect settings and enable the functions for your application
+
3. Highlight the areas in red that you want to track motion.
 +
<br>Then click '''OK''' at the bottom
  
−
[[File:NGUIMotionRecord-3.jpg|900px]]
+
[[File:NewGUIMotionDetection3.png|1000px]]
  
−
4. Click on "Settings" next to region to modify hot spots.
+
4. Select '''More''' at the bottom
 +
<br>Check the boxes next to any of the other options you want to activate when motion is detected.
 +
<br>Click on '''OK'''
  
−
'''Note'''-Colored boxes detect motion, transparent boxes do not detect motion
+
[[File:NewGUIMotionDetection4.png|1000px]]
  
−
[[File:NGUIMotionRecord-4.jpg|900px]]
+
5. Click on '''Apply''' at the bottom.
 +
<br>You will see "Operation Succeeded" at the top when your changes have been saved
  
−
5. Click on "More Settings" to open up the rest of the options for Motion Detect
+
[[File:NewGUIMotionDetection5.png|1000px]]
  
−
[[File:NGUIMotionRecord-5.jpg|900px]]
+
6. Click on the '''Setting''' drop-down at the top and select '''Storage'''
  
−
6. After configuring the settings, check "Enable MD" to enable motion detect and save the configurations by clicking on "Save"
+
[[File:NewGUIMotionDetection6.png|1000px]]
  
−
[[File:NGUIMotionRecord-6.jpg|900px]]
+
7. Select '''Schedule''' on the left.
 +
<br>Then select the '''Record''' tab at the top.
 +
<br>Choose the channel from the drop-down next to '''Channel'''.
 +
<br>Click on the '''Setting''' button next to any day of the week.
  
−
7. We need to setup a schedule now so go to "Management" and click on "Storage"
+
[[File:NewGUIMotionDetection7.png|1000px]]
  
−
[[File:NGUIMotionRecord-7.jpg|900px]]
+
8. Check the '''All''' box to enable all days of the week.
 +
<br>Check the '''Motion''' box for "Period 1".
 +
<br>Click '''Apply at the bottom.
  
−
8. Select the channel you are working with and go to settings
+
[[File:NewGUIMotionDetection8.png|1000px]]
  
−
[[File:NGUIMotionRecord-8.jpg|900px]]
+
9. Click on '''Apply''' at the bottom to save the settings
  
−
9. For this example we are doing Motion recording only for everyday of the week, so we disabled General recording and only kept Motion
+
[[File:NewGUIMotionDetection9.png|1000px]]
  
−
[[File:NGUIMotionRecord-9.jpg|900px]]
+
10. Select '''Record Mode''' on the left.
 +
<br>Then make sure '''Auto''' is enabled for the appropriate channel(s).
 +
<br>Click on '''Apply''' at the bottom.
  
−
10. After setting up a schedule make sure you save any changes. Next go to "Record"
+
[[File:NewGUIMotionDetection10.png|1000px]]
  
−
*'''Note'''- Clicking to "Copy" will allow you copy the current settings to other channels
+
11. Click on the Main Menu icon at the top right.
 +
<br>Then select '''Search'''
  
−
[[File:NGUIMotionRecord-10.jpg|900px]]
+
[[File:NewGUIMotionDetection11.png|1000px]]
  
−
11. Make sure the channel(s) you are working with are set to "Auto" for the streams you want to enable. After doing so, exit the "Storage" tab.
+
12. Check box next to the channel on the right.
 +
<br>You should see yellow lines/bars for motion recording
  
−
[[File:NGUIMotionRecord-11.jpg|900px]]
+
[[File:NewGUIMotionDetection12.png|1000px]]
−
 
 
−
12. Go to "Video"
 
−
 
 
−
[[File:NGUIMotionRecord-12.jpg|900px]]
 
−
 
 
−
13. You can now check recording for motion. It will be indicated with yellow bars
 
−
 
 
−
[[File:NGUIMotionRecord-13.jpg|900px]]
 
−
 
 
−
 
 
−
[[Category:Web_UI]]
 
−
[[Category:How_To]]
 
−
 
 
−
[[Category:Setup]]
 

Revision as of 18:46, 29 December 2022

New GUI - Motion Detection Recording Setup

Description

This article will go over Motion Detection Recording setup in detail on the recorder's new GUI

Prerequisites

  • Dahua Recorder with new GUI
  • Dahua Camera

Step by Step Instructions

1. On the main menu select Alarm

NewGUIMotionDetection1.png

2. Select Video Detection on the left.
Then select the Motion Detection tab at the top.
Choose the channel from the drop-down next to Channel.
Check the box next to Enable.
Check the box next to Record Channel.
Click on Setting next to Region

NewGUIMotionDetection2.png

3. Highlight the areas in red that you want to track motion.
Then click OK at the bottom

NewGUIMotionDetection3.png

4. Select More at the bottom
Check the boxes next to any of the other options you want to activate when motion is detected.
Click on OK

NewGUIMotionDetection4.png

5. Click on Apply at the bottom.
You will see "Operation Succeeded" at the top when your changes have been saved

NewGUIMotionDetection5.png

6. Click on the Setting drop-down at the top and select Storage

NewGUIMotionDetection6.png

7. Select Schedule on the left.
Then select the Record tab at the top.
Choose the channel from the drop-down next to Channel.
Click on the Setting button next to any day of the week.

NewGUIMotionDetection7.png

8. Check the All box to enable all days of the week.
Check the Motion box for "Period 1".
Click Apply at the bottom.

NewGUIMotionDetection8.png

9. Click on Apply at the bottom to save the settings

NewGUIMotionDetection9.png

10. Select Record Mode on the left.
Then make sure Auto is enabled for the appropriate channel(s).
Click on Apply at the bottom.

NewGUIMotionDetection10.png

11. Click on the Main Menu icon at the top right.
Then select Search

NewGUIMotionDetection11.png

12. Check box next to the channel on the right.
You should see yellow lines/bars for motion recording

NewGUIMotionDetection12.png

Retrieved from "https://DahuaWiki.com/index.php?title=New_GUI/Instructions/Motion_Record&oldid=80632"