Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:Product Point to Point"
(→Step by Step Instructions for Wireless Transmission Devices) |
(→Step by Step Instructions for Wireless Transmission Devices) |
||
Line 94: | Line 94: | ||
== Step by Step Instructions for Wireless Transmission Devices == | == Step by Step Instructions for Wireless Transmission Devices == | ||
* It is best to setup these device on a bench before installing them. | * It is best to setup these device on a bench before installing them. | ||
− | * Power on and Configure one device at a time, they all the same '''default IP address'''. | + | * Power on and Configure one device at a time, they all have the same '''default IP address'''. |
* Always use the included POE injector on all configurations. | * Always use the included POE injector on all configurations. | ||
* What is in the BOX - DH-PFWB5-10ac. | * What is in the BOX - DH-PFWB5-10ac. |
Revision as of 21:16, 19 November 2019
Contents
Product
NOTE
DO NOT MIX GENERATION 1 and GENERATION 2 DEVICES!
Networking Mode
Point to Point | 400px |
Point to Multipoint | 400px |
Information
- 192.168.1.36 is default IP
- Default User Name = admin
- Default Password = admin
- DHI-PFWB5-10n-Station, square unit, satellite
- DHI-PFWB5-90n-Access Point, long skinny unit, Home Base
Operating Modes
802.11n:
- Access Point (autoWDS),
- Access Point (TDMA 2)
- Access Point (TDMA 3)
- Station (WDS/TDMA 2/TDMA 3)
- Station (ARPNAT)
802.11ac:
- Access Point (autoWDS)
- Access Point (TDMA3)
- Station (WDS/TDMA 3)
Step by Step Instructions for Wireless Transmission Devices
- It is best to setup these device on a bench before installing them.
- Power on and Configure one device at a time, they all have the same default IP address.
- Always use the included POE injector on all configurations.
- What is in the BOX - DH-PFWB5-10ac.
1. Connect to the DH-PFWB5-10ac