Difference between revisions of "Template:IVS Heatmap SystemUI OldGUI"

(Step By Step Instructions)
(Step By Step Instructions)
 
Line 12: Line 12:
  
 
1. From the Main Menu of the recorder, select '''Event''' under '''Setting'''
 
1. From the Main Menu of the recorder, select '''Event''' under '''Setting'''
 +
 
[[File:HeatMapping_OGUI-1.PNG|400px]]]
 
[[File:HeatMapping_OGUI-1.PNG|400px]]]
  
Line 20: Line 21:
 
File:HeatMapping_OGUI-3.PNG
 
File:HeatMapping_OGUI-3.PNG
 
</gallery>
 
</gallery>
 +
 +
3. Next while still under Event select  '''Heat Map''' from the left-side menu and for the correct channel click the '''Enable''' checkbox and set the schedule using '''Period''' if needed. Hit '''Apply''' to save.
 +
 +
[[File:HeatMapping_OGUI-4.PNG|400px]]

Latest revision as of 20:27, 6 December 2019

Description

This article will cover ow to set up Heat Mapping on the older Dahua NVR interface.

Prerequisites

  • A Dahua NVR & Camera with Heat Mapping capabilities

Video Instructions

Step By Step Instructions

1. From the Main Menu of the recorder, select Event under Setting

HeatMapping OGUI-1.PNG]


2. Under Event select Smart Plan and then Heat Map for your SmartPlan. Click Apply to save.

3. Next while still under Event select Heat Map from the left-side menu and for the correct channel click the Enable checkbox and set the schedule using Period if needed. Hit Apply to save.

HeatMapping OGUI-4.PNG