Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "USA/IPCamera/PTZ/Pro/40212TNI"

(→‎Hardware Reset Instructions)
Line 35: Line 35:
 
[[Category:Model Specific Pages]]
 
[[Category:Model Specific Pages]]
 
[[Category:HD-CVI]]
 
[[Category:HD-CVI]]
−
 
−
 
−
===Hardware Reset Instructions===
 
−
 
−
In order to access the hardware reset button on the camera you must remove the outer casing and shell.
 
−
 
−
Remove the 2 anchoring screws , 1 is circled in the below image the other screw will located on the opposite side (not pictured)
 
−
 
−
[[File:40212TNI_HW_reset_1.jpg|600px]]
 
−
 
−
 
−
Screw removed:
 
−
 
−
[[File:40212TNI_HW_reset_2.jpg|600px]]
 
−
 
−
You can now remove the outer black shell protecting the camera's internals:
 
−
 
−
[[File:40212TNI_HW_reset_3.JPG|600px]]
 
−
 
−
 
−
[[File:40212TNI_HW_reset_4.jpg|600px]]
 
−
 
−
Press and hold the reset button for 30 seconds with the camera powered on.
 
−
 
−
After 30 seconds the camera should reset, if it does not work try the reset procedure a second time.
 

Revision as of 16:18, 6 March 2020

40212TNI

50230UNI.png

QSGDownloadBanner.jpg

float

Features

  • 1/2.8-in. 2 MP STARVIS™ CMOS Sensor
  • Starlight Technology for Ultra-low Light Sensitivity
  • 12x Optical Zoom
  • Triple-stream Encoding
  • H.265 and H.264 Dual Codecs
  • 1080p at 30 fps Maximum Resolution
  • Intelligent Video System (IVS)
  • ArcticPro Series Camera - Operational down to –40° C (–40° F)
  • IP66 Ingress Protection and IK10 Vandal Resistance
  • PoE+ Support
  • Five-year Warranty (for products sold through authorized Dahua Dealers)

Firmware

Firmware Update Instructions

Firmware Update Download

Specifications

Retrieved from "https://DahuaWiki.com/index.php?title=USA/IPCamera/PTZ/Pro/40212TNI&oldid=58512"