Difference between revisions of "LincX2PRO/Setup PIR Sensor"
(→Instructions) |
|||
Line 2: | Line 2: | ||
==Description== | ==Description== | ||
+ | This guide will show how to adjust the PIR sensor for the LincX2PRO devices: [[LincX2PRO/L26N|L26N]] and [[LincX2PRO/C26EN|C26EN]] | ||
==Prerequisites== | ==Prerequisites== | ||
+ | * [[LincX2PRO/L26N|L26N]] / [[LincX2PRO/C26EN|C26EN]] setup and added to the mobile app | ||
==Instructions== | ==Instructions== | ||
<div class="toccolours mw-collapsible mw-collapsed"> | <div class="toccolours mw-collapsible mw-collapsed"> |
Revision as of 23:50, 23 March 2020
Contents
Setup PIR Sensor
Description
This guide will show how to adjust the PIR sensor for the LincX2PRO devices: L26N and C26EN
Prerequisites
Instructions
Mobile:iDMSS Plus & gDMSS Plus
Prerequisites
- L26 or C26 LincX2Pro Device
- iDMSS / gDMSS installed, device setup and added to app
Video Instructions
Step by Step Instructions
1. From the home screen select Device
2. Select the device from the list
3. Select Floodlight
4. Select PIR Region
5. Tap a Zone to disable/enable
6. Use the slide to adjust the range of the Zones
7. Press the Save icon in the top right to save settings