Difference between revisions of "NVR/Basic Setup/Set IP Address"
| Line 17: | Line 17: | ||
[[File:IPCSetIP3.jpg|none]] | [[File:IPCSetIP3.jpg|none]] | ||
Step 4: | Step 4: | ||
| − | [[File:IPCSetIP4. | + | [[File:IPCSetIP4.png|none]] |
Then you can proceed to configure the camera such as an firmware upgrade. | Then you can proceed to configure the camera such as an firmware upgrade. | ||
Revision as of 00:49, 2 February 2016
How to set IP address for configuring IP cameras
Connect a RJ45 cable from camera to NVRThen connect a RJ45 cable from NVR to PC.
Go to wifi to be on the same network as the camera.
Go and find the IP address of the camera using the config tool.
Set the IP address of the laptop same as the camera.
Here's how: Step 1:
Step 2:
Step 3:
Step 4:
Then you can proceed to configure the camera such as an firmware upgrade.
