Difference between revisions of "Template:LincX2PRO Add to Recorder WebUI Old"
Line 2: | Line 2: | ||
These instructions will show you how to add a LincX2PRO device to a Dahua recorder at the WebUI wwith OldGUI | These instructions will show you how to add a LincX2PRO device to a Dahua recorder at the WebUI wwith OldGUI | ||
==Prerequisites== | ==Prerequisites== | ||
− | * | + | * LincX2PRO device |
− | * Dahua NVR, DVR, or XVR | + | * Dahua NVR, DVR, or XVR, on same network as LincX2PRO device |
− | |||
===Video Instructions=== | ===Video Instructions=== | ||
<embedvideo service="youtube">https://youtu.be/bNGjpZAnFTw</embedvideo> | <embedvideo service="youtube">https://youtu.be/bNGjpZAnFTw</embedvideo> |
Revision as of 23:50, 25 February 2020
Description
These instructions will show you how to add a LincX2PRO device to a Dahua recorder at the WebUI wwith OldGUI
Prerequisites
- LincX2PRO device
- Dahua NVR, DVR, or XVR, on same network as LincX2PRO device
Video Instructions
Step By Step Instructions
1. From the Main Menu of the WebUI
Click Setup
2. Under Registration
Click Device Search
The recorder will scan the local network for devices
3. Find the DB11 in the list
Check the box next to the device in the list
Click Add
4. The DB11 will move to Added Device
Click the Pencil icon under Modify to change any settings form the DB11, such as Password or Port information (if required)
5. Once the DB11 is successfully connected you will see a green light under status
6. The DB11 video feed will appear in live view