Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:Temperature Monitoring Camera Setup"
Line 52: | Line 52: | ||
[[File:Temperature_Monitoring_-_Camera_Setup_-_10.jpg|450px]] | [[File:Temperature_Monitoring_-_Camera_Setup_-_10.jpg|450px]] | ||
+ | |||
+ | 12. Check the box to '''Enable''' | ||
[[File:Temperature_Monitoring_-_Camera_Setup_-_11.jpg|450px]] | [[File:Temperature_Monitoring_-_Camera_Setup_-_11.jpg|450px]] | ||
+ | |||
+ | 13. Click Draw Rule | ||
+ | |||
+ | Then draw the desired rule | ||
[[File:Temperature_Monitoring_-_Camera_Setup_-_12.jpg|450px]] | [[File:Temperature_Monitoring_-_Camera_Setup_-_12.jpg|450px]] |
Revision as of 21:42, 2 April 2020
Video Instructions
Step by Step Instructions
1. Enter the IP of the device into a browser (default 192.168.1.108)
At the Web Login
Enter the Username and Password
Click Login
2. Select Setting
3. Select Smart Thermal
4. Select Smart Plan
5. Select the Temperature icon then click Save
6. Select Human Temperature
7. Select Blackbody parameter
8. Select the Draw Rule button
9. Draw a box inside the highlighted blackbody box
10. Check the box to Enable
Click Save
11. Select Human Temperature Measurement
12. Check the box to Enable
13. Click Draw Rule
Then draw the desired rule