Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:Temperature Monitoring Camera Setup"
| Line 13: | Line 13: | ||
2. Select Setting | 2. Select Setting | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_1.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_1.jpg|500px]] |
3. Select Smart Thermal | 3. Select Smart Thermal | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_2.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_2.jpg|500px]] |
4. Select Smart Plan | 4. Select Smart Plan | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_3.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_3.jpg|500px]] |
5. Select the Temperature icon then click Save | 5. Select the Temperature icon then click Save | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_4.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_4.jpg|500px]] |
6. Select Human Temperature | 6. Select Human Temperature | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_5.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_5.jpg|500px]] |
7. Select Blackbody parameter | 7. Select Blackbody parameter | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_6.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_6.jpg|500px]] |
8. Select the '''Draw Rule''' button | 8. Select the '''Draw Rule''' button | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_7.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_7.jpg|500px]] |
9. Draw a box inside the highlighted blackbody box | 9. Draw a box inside the highlighted blackbody box | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_8.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_8.jpg|500px]] |
10. Check the box to '''Enable''' | 10. Check the box to '''Enable''' | ||
| Line 47: | Line 47: | ||
Click '''Save''' | Click '''Save''' | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_9.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_9.jpg|500px]] |
11. Select Human Temperature Measurement | 11. Select Human Temperature Measurement | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_10.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_10.jpg|500px]] |
12. Check the box to '''Enable''' | 12. Check the box to '''Enable''' | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_11.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_11.jpg|500px]] |
13. Click Draw Rule | 13. Click Draw Rule | ||
| Line 61: | Line 61: | ||
Then draw the desired rule | Then draw the desired rule | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_12.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_12.jpg|500px]] |
14. Click '''Save''' | 14. Click '''Save''' | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_13.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_13.jpg|500px]] |
15. Select '''Temperature''' | 15. Select '''Temperature''' | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_14.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_14.jpg|500px]] |
16. Select '''Global Setup''' | 16. Select '''Global Setup''' | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_15.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_15.jpg|500px]] |
17. Select Temperature Switch | 17. Select Temperature Switch | ||
| Line 79: | Line 79: | ||
Use the dropdown box to change the unit to F (Fahrenheit) | Use the dropdown box to change the unit to F (Fahrenheit) | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_16.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_16.jpg|500px]] |
18. Click Save | 18. Click Save | ||
| − | [[File:Temperature_Monitoring_-_Camera_Setup_-_17.jpg| | + | [[File:Temperature_Monitoring_-_Camera_Setup_-_17.jpg|500px]] |
Latest revision as of 16:39, 3 April 2020
Video Instructions
Step by Step Instructions
1. Enter the IP of the device into a browser (default 192.168.1.108)
At the Web Login
Enter the Username and Password
Click Login
2. Select Setting
Error creating thumbnail: File missing
3. Select Smart Thermal
Error creating thumbnail: File missing
4. Select Smart Plan
Error creating thumbnail: File missing
5. Select the Temperature icon then click Save
Error creating thumbnail: File missing
6. Select Human Temperature
Error creating thumbnail: File missing
7. Select Blackbody parameter
Error creating thumbnail: File missing
8. Select the Draw Rule button
Error creating thumbnail: File missing
9. Draw a box inside the highlighted blackbody box
Error creating thumbnail: File missing
10. Check the box to Enable
Click Save
Error creating thumbnail: File missing
11. Select Human Temperature Measurement
Error creating thumbnail: File missing
12. Check the box to Enable
Error creating thumbnail: File missing
13. Click Draw Rule
Then draw the desired rule
Error creating thumbnail: File missing
14. Click Save
Error creating thumbnail: File missing
15. Select Temperature
Error creating thumbnail: File missing
16. Select Global Setup
Error creating thumbnail: File missing
17. Select Temperature Switch
Use the dropdown box to change the unit to F (Fahrenheit)
Error creating thumbnail: File missing
18. Click Save
Error creating thumbnail: File missing
