Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/Initial NVR Setup"
(→Device Initialization) |
(→Step by Step Instructions) |
||
| Line 19: | Line 19: | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
===Device Initialization=== | ===Device Initialization=== | ||
| + | 1. Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer | ||
[[File:Temperature_Monitoring_-_Initial_NVR_Setup_-_1.jpg|700px]] | [[File:Temperature_Monitoring_-_Initial_NVR_Setup_-_1.jpg|700px]] | ||
Revision as of 16:53, 5 May 2020
Temperature Monitoring Solution Initial NVR Setup
Description
This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update and factory default
Prerequisites
- DHI-NVR5216-16P-I powered and connected to network
- Latest firmware for NVR (see below)
Temperature Monitoring Solution Firmware
| NVR Model | Firmware |
|---|---|
| DHI-NVR5216-16P-I | |
Video Instructions
Step by Step Instructions
Device Initialization
1. Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer
