Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/Initial NVR Setup"
(→Device Initialization) |
(→Device Initialization) |
||
| Line 23: | Line 23: | ||
<gallery> | <gallery> | ||
| − | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_1.jpg| | + | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_1.jpg|Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer |
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_2.jpg|Configure a intrusion rule along obvious perimeters, such as lawns and lakes. | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_2.jpg|Configure a intrusion rule along obvious perimeters, such as lawns and lakes. | ||
File:Temperature_Monitoring_-_Initial_NVR_Setup_-_3.jpg|Install cameras at a high position perpendicular to the road to monitor humans and vehicles. | File:Temperature_Monitoring_-_Initial_NVR_Setup_-_3.jpg|Install cameras at a high position perpendicular to the road to monitor humans and vehicles. | ||
Revision as of 17:15, 5 May 2020
Temperature Monitoring Solution Initial NVR Setup
Description
This guide will cover the initial NVR Setup for the Thermal Temperature Monitoring Solution including device initialization, firmware update and factory default
Prerequisites
- DHI-NVR5216-16P-I powered and connected to network
- Latest firmware for NVR (see below)
Temperature Monitoring Solution Firmware
| NVR Model | Firmware |
|---|---|
| DHI-NVR5216-16P-I | |
Video Instructions
Step by Step Instructions
Device Initialization
Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer
Configure a intrusion rule along obvious perimeters, such as lawns and lakes.
Install cameras at a high position perpendicular to the road to monitor humans and vehicles.
Install cameras at park or garage entrances to detect humans who goes into the motorway or vehicles which goes into a pedestrian area
Configure tripwire rules at store entrances.
Configure tripwire rules at store entrances.
Configure tripwire rules at store entrances.
Configure tripwire rules at store entrances.
1. Enter the IP address of the NVR - default 192.168.1.108 in Internet Explorer on a local computer
Confirm/Upgrade NVR Firmware
