Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/Temperature Monitoring/3rd Party VMS/Milestone/Setup Camera"
(→Initialize Camera) |
(→Configure Camera) |
||
Line 14: | Line 14: | ||
===Configure Camera=== | ===Configure Camera=== | ||
1. Log into the Web interface of the camera | 1. Log into the Web interface of the camera | ||
+ | |||
+ | |||
+ | [[File:Thermal_Temperature_Monitoring_-_Milestone_-_Camera_Configuration_-_1.jpg|800px]] | ||
+ | |||
+ | [[File:Thermal_Temperature_Monitoring_-_Milestone_-_Camera_Configuration_-_2.jpg|800px]] | ||
+ | |||
+ | [[File:Thermal_Temperature_Monitoring_-_Milestone_-_Camera_Configuration_-_3.jpg|800px]] |
Revision as of 22:37, 14 May 2020
Contents
Install Dahua Plugin
Description
This guide will show how to initialize and configure the Dahua Thermal camera in preparation for use with Milestone
Prerequisites
- Dahua Thermal camera power on connected to network
Step by Step Instructions
Initialize Camera
Please reference this guide for initial setup of the Thermal camera:
Stand Alone Thermal Camera Initial Setup
Configure Camera
1. Log into the Web interface of the camera