Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/WebUI Breakdown"

Line 4: Line 4:
 
|{{Template:Kiosk_WebUI_Alarm_Linkage}}
 
|{{Template:Kiosk_WebUI_Alarm_Linkage}}
 
|-
 
|-
−
|[[file:Kiosk_Data_Capacity_Icon.png]]Data Capacity
+
|{{Template:Kiosk_WebUI_Data_Capacity}}
 
|-
 
|-
 
|[[file:Kiosk_Data_Capacity_Icon.png]]Video Setting
 
|[[file:Kiosk_Data_Capacity_Icon.png]]Video Setting

Revision as of 17:53, 16 June 2020

DHI-ASI7213X-T1: WebUI

Kiosk Alarm Linkage Icon.png Alarm Linkage

Name Description
Alarm Input You cannot modify the value. Keep it default.
Name Enter a zone name.
Alarm Input Type

There are two options: NO and NC. If alarm input type of the alarm device you purchased is NO, then you should select NO; otherwise you should select NC.

Fire Link Enable

If fire link is enabled the access controller will output alarms when fire alarms are triggered. The alarm details will be displayed in the alarm log.
Alarm output and access link are NO by default if fire link is enabled.

Alarm Output Enable

The relay can output alarm information (will be sent to the management platform) if the Alarm Output is enabled.

Duration (Sec.) The alarm duration, and the range is 1–300 seconds.
Alarm Output Channel

You can select an alarm output channel according to the alarming device that you have installed. Each alarm device can be regarded as a channel.

Access Link Enable

After the Access Link is enabled, the access controller will be normally on or normally closed when there are input alarm signals.

Channel Type There are two options: NO and NC.

Alarm Linkage

Kiosk Alarm Linkage Page.png

Alarm Log

Kiosk Alarm Log Page.png

Kiosk Data Capacity Icon.png Data Capacity

Data Capacity

Kiosk Data Capacity Page.png

Kiosk Data Capacity Icon.pngVideo Setting
Kiosk Face Detect Icon.pngFace Detect
Kiosk Network Setting Icon.pngNetwork Setting
Kiosk Safety Mgmt.pngSafety Mgmt
Kiosk User Mgmt Icon.pngUser Mgmt
Kiosk Maintenance.pngMaintenance
Kiosk Config Mgmt Icon.pngConfig Mgmt
Kiosk Upgrade Icon.pngUpgrade
Kiosk Version Info Icon.pngVersion Info
Kiosk Online User Icon.pngOnline User
Kiosk System Log Icon.pngSystem Log
Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/DHI-ASI7213X-T1/Instructions/WebUI_Breakdown&oldid=64524"