Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/WebUI Breakdown"

Line 6: Line 6:
 
|{{Template:Kiosk_WebUI_Data_Capacity}}
 
|{{Template:Kiosk_WebUI_Data_Capacity}}
 
|-
 
|-
|[[file:Kiosk_Data_Capacity_Icon.png]]Video Setting
+
|{{Template:Kiosk_WebUI_Video_Setting}}
 
|-
 
|-
 
|[[file:Kiosk_Face_Detect_Icon.png]]Face Detect
 
|[[file:Kiosk_Face_Detect_Icon.png]]Face Detect

Revision as of 17:54, 16 June 2020

DHI-ASI7213X-T1: WebUI

Kiosk Alarm Linkage Icon.png Alarm Linkage

Name Description
Alarm Input You cannot modify the value. Keep it default.
Name Enter a zone name.
Alarm Input Type

There are two options: NO and NC. If alarm input type of the alarm device you purchased is NO, then you should select NO; otherwise you should select NC.

Fire Link Enable

If fire link is enabled the access controller will output alarms when fire alarms are triggered. The alarm details will be displayed in the alarm log.
Alarm output and access link are NO by default if fire link is enabled.

Alarm Output Enable

The relay can output alarm information (will be sent to the management platform) if the Alarm Output is enabled.

Duration (Sec.) The alarm duration, and the range is 1–300 seconds.
Alarm Output Channel

You can select an alarm output channel according to the alarming device that you have installed. Each alarm device can be regarded as a channel.

Access Link Enable

After the Access Link is enabled, the access controller will be normally on or normally closed when there are input alarm signals.

Channel Type There are two options: NO and NC.

Alarm Linkage

Kiosk Alarm Linkage Page.png

Alarm Log

Kiosk Alarm Log Page.png

Kiosk Data Capacity Icon.png Data Capacity

Data Capacity

Kiosk Data Capacity Page.png

Kiosk Data Capacity Icon.png Video Setting

Video Setting

Data Rate

Kiosk Video Setting Page Data Rate.png

Name Description
Video Standard There are two options: NTSC and PAL. Select a standard according to the video standard of your region.
Channel There are two options: 1 and 2. 1 is white light camera and 2 is IR

light camera.

Main Format
Video Format There are four options: D1, VGA, 720p and 1080p. Select an option according to the video quality you want.
Frame Rate The rate at which consecutive frames appear on a display. The frame rate range is 1–30fps.
Bit Rate The number of bits that are conveyed or processed per unit of time. There are five options: 2Mbps, 4Mbps, 6Mbps, 8Mbps, and 10Mbps
Extra Format
Video Format There are three options: D1, VGA, and QVGA.
Frame Rate The rate at which consecutive frames appear on a display. The frame rate range is 1–30fps.
Bit Rate The number of bits that are conveyed or processed per unit of time. There are options: 512Kbps, 640Kbps, 768Kbps, 896Kbps, 1024Kbps, 1.25Mbps, 1.5Mbps, 1.75Mbps, and 2Mbps

Image

Kiosk Video Setting Page Image.png

Name Description
Brightness The larger the value is, the brighter the images will be.
Contrast Contrast is the difference in luminance or color that makes an object distinguishable. The larger the contrast value is, the greater the brightness and color contrast will be.
Hue The larger the value is, the deeper the color will be.
Saturation The larger the value is, the brighter the colors will be. The value does not change image brightness.
Scene Mode
  • Close: Without modes.
  • Auto: The system automatically adjusts scene modes.
  • Sunny: In this mode, image hue will be reduced.
  • Night: In this mode, image hue will be increased.

(Sunny is selected by default.)

Day/Night Mode

Day/Night mode decides the working status of the fill light.

  • Auto: The system automatically adjusts the day/night modes.
  • Colorful: In this mode, images are with colors.
  • Black and white: In this mode, images are in black and white.
Back Light Mode
  • Close: Without backlight compensation.
  • BLC: Backlight compensation corrects regions with extremely high or low levels of light to maintain a normal and usable level of light for the object in focus.
  • WDR: In the wide dynamic range mode, the system dims bright areas and compensates dark areas to ensure the definition of objects in the bright areas and dark areas. When human faces are in the backlight, you need to enable WDR.
  • HLC: Highlight compensation is needed to compensate for overexposure of highlights or strong light sources like spotlights, headlights, porch lights, etc. to create an image that is usable and not overtaken by a bright light.
Mirror When the function is enabled, images will be displayed with left and right side reversed.
Flip When this function is enabled, images can be flipped over.

Exposure

Kiosk Video Setting Page Exposure.png

Name Description
Anti-flicker
  • 50Hz: When the utility frequency of alternating current is 50Hz, the exposure is automatically adjusted to make sure that there are no stripes on images.
  • 60Hz: When the utility frequency of alternating current is 60Hz, the exposure is automatically adjusted to make sure that there are no stripes on images.
  • Outdoor: When Outdoor is selected, the exposure mode can be switched.
Exposure Mode
  • When you select Outdoor in the Anti-flicker drop-down list, you can select Shutter Priority as the exposure mode.
  • Exposure modes of different devices might vary, and the actual product shall prevail.

You can select from:

  • Auto: The access controller will automatically adjust brightness of images.
  • Shutter Priority: The access controller will adjust image brightness according to shutter exposure value range. If the image brightness is not enough and the shutter value has reached upper or lower limit, the access controller will adjust gain value automatically to get ideal brightness.
  • Manual: You can configure gain and shutter value manually to adjust image brightness
Shutter The larger the shutter value is and the shorter the exposure time is, the darker the images will be.
Shutter Value Range If you select Customized Range, you can customize the shutter value range.
Gain Value Range When the gain value range is set, video quality will be improved.
Exposure Compensation You can increase video brightness by adjusting exposure compensation value.
3D NR When 3D Noise Reduction (RD) is enabled, video noise can be reduced, and high definition videos will be produced.
Grade You can adjust the value of the 3D NR when 3D NR is enabled. The larger the value is, the less the noise there will be.

Motion Detect

Kiosk Video Setting Page Motion Detect.png

Volume Setting

Kiosk Video Setting Page Volume Setting.png

Image Mode

Kiosk Video Setting Page Image Mode.png

Kiosk Face Detect Icon.pngFace Detect
Kiosk Network Setting Icon.pngNetwork Setting
Kiosk Safety Mgmt.pngSafety Mgmt
Kiosk User Mgmt Icon.pngUser Mgmt
Kiosk Maintenance.pngMaintenance
Kiosk Config Mgmt Icon.pngConfig Mgmt
Kiosk Upgrade Icon.pngUpgrade
Kiosk Version Info Icon.pngVersion Info
Kiosk Online User Icon.pngOnline User
Kiosk System Log Icon.pngSystem Log