Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"
Line 1: | Line 1: | ||
=Alarm Input and Output= | =Alarm Input and Output= | ||
==Cable Connections== | ==Cable Connections== | ||
+ | ===Contact 1=== | ||
{| class="wikitable" | {| class="wikitable" | ||
!|Port | !|Port | ||
Line 48: | Line 49: | ||
|} | |} | ||
− | + | ===Contact 2=== | |
− | |||
− | |||
− | |||
{| class="wikitable" | {| class="wikitable" | ||
− | + | !|Port | |
+ | !|Cable Color | ||
+ | !|Cable Name | ||
+ | !|Description | ||
|- | |- | ||
− | + | |+CON2 | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | |rowspan=" | + | |rowspan="9"|CON2 |
|- | |- | ||
− | | | + | |White and red |
− | | | + | |ALARM1_NO |
− | | | + | |Alarm 1 normally open output port |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | |White and orange |
− | | | + | |ALARM1_COM |
− | | | + | |Alarm 1 common output port. |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | |White and blue |
− | | | + | |ALARM2_NO |
− | | | + | |Alarm 2 normally open output port. |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | |White and gray |
+ | |ALARM2_COM | ||
+ | |Alarm 2 common output port. | ||
|- | |- | ||
− | | | + | |White and green |
− | | | + | |GND |
− | | | + | |Connected to the common GND port. |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | |White Brown |
− | | | + | |ALARM1 |
− | | | + | |Alarm 1 input port. |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | |White and yellow |
− | | | + | |GND |
− | | | + | |Connected to the common GND port. |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
+ | |White and purple | ||
+ | |ALARM2 | ||
+ | |Alarm 2 input port. | ||
|} | |} |
Revision as of 17:14, 18 June 2020
Alarm Input and Output
Cable Connections
Contact 1
Port | Cable Color | Cable Name | Description |
---|---|---|---|
CON1 | |||
Black | RD– | Negative electrode of external card reader. | |
Red | RD+ | Positive electrode of external card reader. | |
Blue | CASE | Tamper alarm input of the external card reader. | |
White | D1 | Wiegand D1 input (connected to external card reader)/output (connected to controller). | |
Green | D0 | Wiegand D0 input (connected to external card reader)/output (connected to controller). | |
Brown | LED | Connected to external reader indicator in | |
Yellow | B | RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
| |
Purple | A | RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
|
Contact 2
Port | Cable Color | Cable Name | Description |
---|---|---|---|
CON2 | |||
White and red | ALARM1_NO | Alarm 1 normally open output port | |
White and orange | ALARM1_COM | Alarm 1 common output port. | |
White and blue | ALARM2_NO | Alarm 2 normally open output port. | |
White and gray | ALARM2_COM | Alarm 2 common output port. | |
White and green | GND | Connected to the common GND port. | |
White Brown | ALARM1 | Alarm 1 input port. | |
White and yellow | GND | Connected to the common GND port. | |
White and purple | ALARM2 | Alarm 2 input port. |