Revision as of 17:55, 18 June 2020

Alarm Input and Output

Cable Connections

Physical Setup

CON1
Port	Cable Color		Cable Name	Description
CON1
	Black	35px	RD–	Negative electrode of external card reader.
	Red	35px	RD+	Positive electrode of external card reader.
	Blue	35px	CASE	Tamper alarm input of the external card reader.
	White	35px	D1	Wiegand D1 input (connected to external card reader)/output (connected to controller).
	Green	File:Wire green.svg	D0	Wiegand D0 input (connected to external card reader)/output (connected to controller).
	Brown	35px	LED	Connected to external reader indicator in
	Yellow		B	RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module). If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power. Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
	Purple		A	RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module). If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power. Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

CON2
Port	Cable Color		Cable Name	Description
CON2
	White and red	35px	ALARM1_NO	Alarm 1 normally open output port
	White and orange		ALARM1_COM	Alarm 1 common output port.
	White and blue	35px	ALARM2_NO	Alarm 2 normally open output port.
	White and gray	35px	ALARM2_COM	Alarm 2 common output port.
	White and green	35px	GND	Connected to the common GND port.
	White Brown	35px	ALARM1	Alarm 1 input port.
	White and yellow	35px	GND	Connected to the common GND port.
	White and purple		ALARM2	Alarm 2 input port.

CON3
Port	Cable Color	Cable Name	Description
CON3
	Black and red	RX	RS-232 receiving port.
	Black and orange	TX	RS-232 sending port.
	Black and blue	GND	Connected to the common GND port.
	Black and gray	SR1	Used for door contact detection.
	Black and green	PUSH1	Door open button of door No.1
	Black and brown	DOOR1_COM	Lock control common port.
	Black and yellow	DOOR1_NO	Lock control normally open port.
	Black and purple	DOOR1_NC	Lock control normally closed port.

@@ Line 119: / Line 119: @@
 {| class="wikitable"
 !|Port
-!|Cable Color
+!colspan="2"|Cable Color
 !|Cable Name
 !|Description
@@ Line 128: / Line 128: @@
 |-
 |Black and red
+|
 |RX
 |RS-232 receiving port.
 |-
 |Black and orange
+|
 |TX
 |RS-232 sending port.
 |-
 |Black and blue
+|
 |GND
 |Connected to the common GND port.
 |-
 |Black and gray
+|
 |SR1
 |Used for door contact detection.
 |-
 |Black and green
+|
 |PUSH1
 |Door open button of door No.1
 |-
 |Black and brown
+|
 |DOOR1_COM
 |Lock control common port.
 |-
 |Black and yellow
+|
 |DOOR1_NO
 |Lock control normally open port.
 |-
 |Black and purple
+|
 |DOOR1_NC
 |Lock control normally closed port.
 |}