Revision as of 19:49, 18 June 2020

Alarm Input and Output

Cable Connections

Physical Setup

Web Interface

Alarm Linkage

Cable Connections

• Alarm1 = Normal
• Alarm2 = High Temp
• No alert for mask or face detection currently.

Contact 1

CON1

Port	Cable Color		Cable Name	Description
CON1
	Black		RD–	Negative electrode of external card reader.
	Red	35px	RD+	Positive electrode of external card reader.
	Blue	35px	CASE	Tamper alarm input of the external card reader.
	White		D1	Wiegand D1 input (connected to external card reader)/output (connected to controller).
	Green	35px	D0	Wiegand D0 input (connected to external card reader)/output (connected to controller).
	Brown	35px	LED	Connected to external reader indicator in
	Yellow	File:Wire yellow.svg	B	RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module). If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power. Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
	Purple		A	RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module). If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power. Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

Contact 2

CON2

Port	Cable Color		Cable Name	Description
CON2
	White and red	35px	ALARM1_NO	Alarm 1 normally open output port
	White and orange		ALARM1_COM	Alarm 1 common output port.
	White and blue	35px	ALARM2_NO	Alarm 2 normally open output port.
	White and gray		ALARM2_COM	Alarm 2 common output port.
	White and green		GND	Connected to the common GND port.
	White Brown	35px	ALARM1	Alarm 1 input port.
	White and yellow	35px	GND	Connected to the common GND port.
	White and purple		ALARM2	Alarm 2 input port.

Contact 3

CON3

Port	Cable Color		Cable Name	Description
CON3
	Black and red	35px	RX	RS-232 receiving port.
	Black and orange	35px	TX	RS-232 sending port.
	Black and blue	35px	GND	Connected to the common GND port.
	Black and gray	35px	SR1	Used for door contact detection.
	Black and green	File:Wire black green stripe.svg	PUSH1	Door open button of door No.1
	Black and brown	35px	DOOR1_COM	Lock control common port.
	Black and yellow	35px	DOOR1_NO	Lock control normally open port.
	Black and purple		DOOR1_NC	Lock control normally closed port.