Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"

(→‎Normal Body Temperature Indication Light)
(→‎High Body Temperature Indication Light)
Line 206: Line 206:
 
|-
 
|-
 
|rowspan="9"|CON2
 
|rowspan="9"|CON2
−
|-
 
−
|White and red
 
−
|[[File:Wire_white_red_stripe.svg|35px]]
 
−
|ALARM1_NO
 
−
|Alarm 1 normally open output port
 
−
|-
 
−
|White and orange
 
−
|[[File:Wire_white_orange_stripe.svg|35px]]
 
−
|ALARM1_COM
 
−
|Alarm 1 common output port.
 
 
|-
 
|-
 
|White and blue
 
|White and blue
Line 226: Line 216:
 
|ALARM2_COM
 
|ALARM2_COM
 
|Alarm 2 common output port.
 
|Alarm 2 common output port.
−
|-
 
−
|White and green
 
−
|[[File:Wire_white_green_stripe.svg|35px]]
 
−
|GND
 
−
|Connected to the common GND port.
 
−
|-
 
−
|White Brown
 
−
|[[File:Wire_white_brown_stripe.svg|35px]]
 
−
|ALARM1
 
−
|Alarm 1 input port.
 
−
|-
 
−
|White and yellow
 
−
|[[File:Wire_white_yellow_stripe.svg|35px]]
 
−
|GND
 
−
|Connected to the common GND port.
 
−
|-
 
−
|White and purple
 
−
|[[file:Wire_white_purple_stripe.png|35px]]
 
−
|ALARM2
 
−
|Alarm 2 input port.
 
 
|}
 
|}
  

Revision as of 15:36, 19 June 2020

Alarm Input and Output

Cable Connections
Physical Setup

Web Interface

  • Alarm Linkage

  • Alarm Linkage Log

  • Alarm Linkage-Modify

Cable Connections

  • Alarm1 = Normal
  • Alarm2 = High Temp
  • No alert for mask or face detection currently.

Contact 1

Port Cable Color Cable Name Description
CON1
CON1
Black 35px RD– Negative electrode of external card reader.
Red 35px RD+ Positive electrode of external card reader.
Blue File:Wire blue.svg CASE Tamper alarm input of the external card reader.
White 35px D1 Wiegand D1 input (connected to external card reader)/output (connected to controller).
Green 35px D0 Wiegand D0 input (connected to external card reader)/output (connected to controller).
Brown 35px LED Connected to external reader indicator in
Yellow 35px B RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid.
Purple Wire purple.png A RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
  • If the security module is enabled, you need to purchase access control security module separately. The security module needs separate power supply to provide power.
  • Once the security module is enabled, the exit button, lock control and firefighting linkage will be invalid

Contact 2

Port Cable Color Cable Name Description
CON2
CON2
White and red 35px ALARM1_NO Alarm 1 normally open output port
White and orange 35px ALARM1_COM Alarm 1 common output port.
White and blue 35px ALARM2_NO Alarm 2 normally open output port.
White and gray 35px ALARM2_COM Alarm 2 common output port.
White and green 35px GND Connected to the common GND port.
White Brown 35px ALARM1 Alarm 1 input port.
White and yellow 35px GND Connected to the common GND port.
White and purple Wire white purple stripe.png ALARM2 Alarm 2 input port.

Contact 3

Port Cable Color Cable Name Description
CON3
CON3
Black and red 35px RX RS-232 receiving port.
Black and orange 35px TX RS-232 sending port.
Black and blue 35px GND Connected to the common GND port.
Black and gray File:Wire black gray stripe.svg SR1 Used for door contact detection.
Black and green Wire black green stripe.svg PUSH1 Door open button of door No.1
Black and brown 35px DOOR1_COM Lock control common port.
Black and yellow 35px DOOR1_NO Lock control normally open port.
Black and purple Wire black purple stripe.png DOOR1_NC Lock control normally closed port.

Normal Body Temperature Indication Light

Port Cable Color Cable Name Description
CON2
CON2
White and red 35px ALARM1_NO Alarm 1 normally open output port
White and orange 35px ALARM1_COM Alarm 1 common output port.

High Body Temperature Indication Light

Port Cable Color Cable Name Description
CON2
CON2
White and blue 35px ALARM2_NO Alarm 2 normally open output port.
White and gray 35px ALARM2_COM Alarm 2 common output port.

Door Strike and Door Release Button Physical Setup

Port Cable Color Cable Name Description
CON3
CON3
Black and red 35px RX RS-232 receiving port.
Black and orange 35px TX RS-232 sending port.
Black and blue 35px GND Connected to the common GND port.
Black and gray File:Wire black gray stripe.svg SR1 Used for door contact detection.
Black and green Wire black green stripe.svg PUSH1 Door open button of door No.1
Black and brown 35px DOOR1_COM Lock control common port.
Black and yellow 35px DOOR1_NO Lock control normally open port.
Black and purple Wire black purple stripe.png DOOR1_NC Lock control normally closed port.
Retrieved from "https://DahuaWiki.com/index.php?title=Thermal/DHI-ASI7213X-T1/Instructions/Alarm_Input_and_Output&oldid=64850"