Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Adjust Temp Monitoring Distance"
| Line 1: | Line 1: | ||
=Adjust Temp Monitoring Distance= | =Adjust Temp Monitoring Distance= | ||
==Description== | ==Description== | ||
| − | These instructions will show how to adjust the Temperature Monitoring Distance for [[Thermal/DHI-ASI7213X-T1|DHI-ASI7213X-T1]] | + | These instructions will show how to adjust the Temperature Monitoring Distance for [[Thermal/DHI-ASI7213X-T1|DHI-ASI7213X-T1]] through the WebUI |
==Prerequisites== | ==Prerequisites== | ||
* [[Thermal/DHI-ASI7213X-T1|DHI-ASI7213X-T1]] setup, connected to network | * [[Thermal/DHI-ASI7213X-T1|DHI-ASI7213X-T1]] setup, connected to network | ||
Revision as of 23:05, 19 June 2020
Contents
Adjust Temp Monitoring Distance
Description
These instructions will show how to adjust the Temperature Monitoring Distance for DHI-ASI7213X-T1 through the WebUI
Prerequisites
- DHI-ASI7213X-T1 setup, connected to network
- Local computer
Video Instructions
Step by Step Instructions
1. Enter the IP Address of the device into Internet Explorer
Enter the username/password
Click Login
2. Click Face Detect
3. Enter the desired distance (in cm) in the field next to Temp Monitoring Distance
4. Click OK to save
A prompt will confirm a successful save
