Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"
(→Cable Connections) |
(→Normal Body Temperature Indication Light) |
||
Line 171: | Line 171: | ||
==Normal Body Temperature Indication Light== | ==Normal Body Temperature Indication Light== | ||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | !|PLEASE NOTE: With firmware version 1.000.10BE001.0.R.200722, Normal Body Temperature Alarm Output must be wired to DOOR1_NC and DOOR1_COM instead of ALARM1_NO and ALARM1_COM in the below diagram | ||
+ | |- | ||
+ | |} | ||
[[File:Normal Temp alarm Setup.png|700px|right]] | [[File:Normal Temp alarm Setup.png|700px|right]] | ||
{| class="wikitable" | {| class="wikitable" |
Revision as of 19:11, 11 August 2020
Contents
- 1 Alarm Input and Output
- 1.1 Web Interface
- 1.2 Cable Connections
- 1.3 Normal Body Temperature Indication Light
- 1.4 High Body Temperature Indication Light
- 1.5 Door Strike Physical Setup
- 1.6 Door Release Button Physical Setup
- 1.7 Card Reader:RS485
- 1.8 Card Reader:Wiegand
- 1.9 WebUI Alarm Setup
- 1.10 SystemUI Set Temperature Threshold
Alarm Input and Output
Web Interface
Cable Connections
- Alarm1 = High Temp
- Alarm2 = No Mask
- No alert for face detection currently.
Contact 1
Contact 2
Contact 3
Normal Body Temperature Indication Light
PLEASE NOTE: With firmware version 1.000.10BE001.0.R.200722, Normal Body Temperature Alarm Output must be wired to DOOR1_NC and DOOR1_COM instead of ALARM1_NO and ALARM1_COM in the below diagram |
---|
Port | Cable Color | Cable Name | Description | |
---|---|---|---|---|
CON2 | ||||
White and red | ![]() |
ALARM1_NO | Alarm 1 normally open output port | |
White and orange | ![]() |
ALARM1_COM | Alarm 1 common output port. |
High Body Temperature Indication Light
Port | Cable Color | Cable Name | Description | |
---|---|---|---|---|
CON2 | ||||
White and blue | ![]() |
ALARM2_NO | Alarm 2 normally open output port. | |
White and gray | ![]() |
ALARM2_COM | Alarm 2 common output port. |
Door Strike Physical Setup
Port | Cable Color | Cable Name | Description | |
---|---|---|---|---|
CON3 | ||||
Black and brown | ![]() |
DOOR1_COM | Lock control common port. | |
Black and purple | ![]() |
DOOR1_NC | Lock control normally closed port. |
Door Release Button Physical Setup
Port | Cable Color | Cable Name | Description | |
---|---|---|---|---|
CON3 | ||||
Black and blue | ![]() |
GND | Connected to the common GND port. | |
Black and green | ![]() |
PUSH1 | Door open button of door No.1 |