Difference between revisions of "Thermal/DH-TPC-HT2201/Instructions/Capture Snapshots Videos"
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
=How to Capture Snapshots and Videos= | =How to Capture Snapshots and Videos= | ||
==Description== | ==Description== | ||
| − | + | This article covers how to take snapshots and videos on a DH-TPC-HT2201 | |
==Prerequisites== | ==Prerequisites== | ||
| − | * | + | * DH-TPC-HT2201 |
| + | * A micro SD Card installed and formatted | ||
| + | '''Micro SD Card MUST be Micro SD HC. Micro SD XC is not compatible.''' | ||
==Video Instructions== | ==Video Instructions== | ||
| − | + | ''Coming Soon'' | |
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| − | 1 . [ | + | 1. To take a snapshot on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 2 times |
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]] | ||
| + | |||
| + | 2. If you successfully took a snapshot, you should see a message on the screen that says "Captured" with a check mark next to it. | ||
| + | <br>The snapshot will be accessible from the installed SD Card | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo2.PNG|400px]] | ||
| + | |||
| + | 3. To take a video on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 3 times | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]] | ||
| + | |||
| + | 4. If you successfully started recording video, you should see a time counter at the bottom of the screen counting up | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo3.PNG|400px]] | ||
| + | |||
| + | 5. When you are done recording video, pull the trigger 3 times to stop recording | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo1.PNG|400px]] | ||
| + | |||
| + | 6. If you successfully stopped recording video, you should see a message on the screen that says "Recorded" with a check mark next to it. | ||
| + | <br>The recorded video will be accessible from the installed SD Card | ||
| + | |||
| + | [[File:DH-TPC-HT2201_SnapshotsVideo4.PNG|400px]] | ||
Revision as of 21:44, 9 September 2020
Contents
How to Capture Snapshots and Videos
Description
This article covers how to take snapshots and videos on a DH-TPC-HT2201
Prerequisites
- DH-TPC-HT2201
- A micro SD Card installed and formatted
Micro SD Card MUST be Micro SD HC. Micro SD XC is not compatible.
Video Instructions
Coming Soon
Step by Step Instructions
1. To take a snapshot on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 2 times
2. If you successfully took a snapshot, you should see a message on the screen that says "Captured" with a check mark next to it.
The snapshot will be accessible from the installed SD Card
3. To take a video on the Handheld Thermal Temperature Monitoring Device, from the live view, pull the trigger 3 times
4. If you successfully started recording video, you should see a time counter at the bottom of the screen counting up
5. When you are done recording video, pull the trigger 3 times to stop recording
6. If you successfully stopped recording video, you should see a message on the screen that says "Recorded" with a check mark next to it.
The recorded video will be accessible from the installed SD Card
