Difference between revisions of "Template:Tripwire SystemUI OldGUI"
(→Step By Step Instructions) |
(→Step By Step Instructions) |
||
| Line 16: | Line 16: | ||
6. Select the Gear icon under "Trigger" to configure what happens when the tripwire alarm is triggered: | 6. Select the Gear icon under "Trigger" to configure what happens when the tripwire alarm is triggered: | ||
| − | + | [[Alarm_Config_Settings|> Configure Tripwire Response]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Select "Apply" to save the settings | Select "Apply" to save the settings | ||
| − | |||
| − | |||
Revision as of 17:33, 29 October 2020
Video Instructions
Step By Step Instructions
1. From the Main Menu select "Event" in the "Setting" section
2. Select "Smart Plan" on the left. Then select the camera channel at the top. Select and highlight "IVS" (You may need to deselect any other options). Select "Apply" and then "OK"
3. Select "IVS" on the left. Then choose the channel number at the top. Select "Add" at the bottom to create a new IVS alarm rule. Click on the drop-down menu under "Type" for the new rule you created and change set it to "Tripwire". Select the Pencil icon under "Draw"
4. Left click anywhere on the camera view to start the tripwire line. Left click anywhere else on the camera view to complete the segment of the line. Continue moving your mouse and left clicking to continue making multiple segments of the tripwire line. When done drawing the line segments, right click to finish the line. Give this rule a name by selecting the text box next to "Name" and typing in a name. Select the drop-down menu next to "Direction" to choose if the IVS alarm is triggered in both directions ("Both") or just one direction ("A To B" or "B To A")
5. When you are done configuring the Tripwire rules, select "OK".
6. Select the Gear icon under "Trigger" to configure what happens when the tripwire alarm is triggered:
Select "Apply" to save the settings
