Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:DMSS/Instructions/LincX2PRO PIR Setup"
(Created page with "==Step by Step Instructions== 1. From the home screen select Device 400px 2. Select the device from the list F...") |
|||
| Line 10: | Line 10: | ||
3. Select Floodlight | 3. Select Floodlight | ||
| − | [[File:L26 C26 - Modify PIR Detection Zone - DMSS - 3 | + | [[File:L26 C26 - Modify PIR Detection Zone - DMSS - 3.jpg|400px]] |
4. Select PIR Region | 4. Select PIR Region | ||
| − | [[File:L26 C26 - Modify PIR Detection Zone - DMSS - 4 | + | [[File:L26 C26 - Modify PIR Detection Zone - DMSS - 4.jpg|400px]] |
5. Tap a Zone to disable/enable | 5. Tap a Zone to disable/enable | ||
Revision as of 20:51, 30 November 2020
Step by Step Instructions
1. From the home screen select Device
2. Select the device from the list
3. Select Floodlight
4. Select PIR Region
5. Tap a Zone to disable/enable
6. Use the slide to adjust the range of the Zones
7. Press the Save icon in the top right to save settings
