Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "Video Intercom/SIP 2.0/How To Add VTO4202 To VTH Via Configtool"

(Pre-requisites)
(Pre-requisites)
Line 5: Line 5:
  
 
==Pre-requisites==
 
==Pre-requisites==
* [[Video_Intercom/Products/DHI-VTO4202F|DHI-VTO4202F]]
+
* Initialized [[Video_Intercom/Products/DHI-VTO4202F|DHI-VTO4202F]]
* DHI-VTH5422HW or DHI-VTH2421FW-P
+
* Initialized DHI-VTH5422HW or DHI-VTH2421FW-P
 
* [https://dahuawiki.com/images/Files/Software/ConfigTool/General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227.zip Configtool 5.000.0000001.7]
 
* [https://dahuawiki.com/images/Files/Software/ConfigTool/General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227.zip Configtool 5.000.0000001.7]
  

Revision as of 18:11, 4 May 2021

How to add DHI-VTO4202F to VTH via Configtool

Description

This article will go over the setup DHI-VTO4202F with Dahua Indoor Monitor by using Configtool software.

Pre-requisites

Video Instructions

Step by Step Instructions