Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Video Intercom/SIP 2.0/How To Add VTO4202 To VTH Via Configtool"
(→Description) |
|||
| Line 4: | Line 4: | ||
This article will go over the setup DHI-VTO4202F with Dahua Indoor Monitor by using Configtool software. | This article will go over the setup DHI-VTO4202F with Dahua Indoor Monitor by using Configtool software. | ||
| − | Please be sure to have followed our How to Initialize Video Intercom using Configtool Guide ---> [[Video_Intercom/SIP_2.0/How_To_Initialize_Video_Intercom_Using_Configtool|Here]] | + | '''Please be sure to have followed our How to Initialize Video Intercom using Configtool Guide ---> [[Video_Intercom/SIP_2.0/How_To_Initialize_Video_Intercom_Using_Configtool|Here]]''' |
==Pre-requisites== | ==Pre-requisites== | ||
Revision as of 18:25, 4 May 2021
Contents
How to add DHI-VTO4202F to VTH via Configtool
Description
This article will go over the setup DHI-VTO4202F with Dahua Indoor Monitor by using Configtool software.
Please be sure to have followed our How to Initialize Video Intercom using Configtool Guide ---> Here
Pre-requisites
- Initialized DHI-VTO4202F
- Initialized DHI-VTH5422HW or DHI-VTH2421FW-P
- Configtool 5.000.0000001.7
