Difference between revisions of "POS/NetAssist Setup On NVR5 Series"
(Created page with "==Description== This article covers NetAssist setup with an N52B3P NVR. ==Prerequisites== *[https://dahuawiki.com/images/Files/Software/NetAssist/NetAssist.exe NetAssist] *PC...") |
|||
| Line 1: | Line 1: | ||
==Description== | ==Description== | ||
| − | This article covers NetAssist setup with an N52B3P NVR. | + | This article covers NetAssist setup with an N52B3P NVR running on 4.0 Firmware. |
==Prerequisites== | ==Prerequisites== | ||
| Line 9: | Line 9: | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| − | 1. | + | 1. Locate the IP address of both NVR and PC that is hosting NetAssist. |
Revision as of 16:33, 16 May 2022
Description
This article covers NetAssist setup with an N52B3P NVR running on 4.0 Firmware.
Prerequisites
- NetAssist
- PC to run NetAssist
- NVR with POS Support
NVR5 series and NVR6A08 support POS with stock firmware
Step by Step Instructions
1. Locate the IP address of both NVR and PC that is hosting NetAssist.
