Difference between revisions of "NVR/Basic Setup/Set IP Address"
(→How to set IP address for configuring IP cameras) |
|||
| Line 10: | Line 10: | ||
Here's how: | Here's how: | ||
| − | Step 1: | + | Step 1: Right Click on the Windows Start up ➞ Click on Control Panel. |
| + | |||
| + | [[File:set_ip_locally_wiki_1.png|none]] | ||
| + | |||
| + | Step 2. | ||
[[File:IPCSetIP1.jpg|none]] | [[File:IPCSetIP1.jpg|none]] | ||
Step 2: | Step 2: | ||
Revision as of 17:32, 29 March 2016
How to set IP address for configuring IP cameras
Connect a RJ45 cable from camera to NVRThen connect a RJ45 cable from NVR to PC.
Go to wifi to be on the same network as the camera.
Go and find the IP address of the camera using the config tool.
Set the IP address of the laptop same as the camera.
Here's how: Step 1: Right Click on the Windows Start up ➞ Click on Control Panel.
Step 2.
Step 2:
Step 3:
Step 4:
Then you can proceed to configure the camera such as an firmware upgrade.
