Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "CMS/DSS/Add Decoder"
(→How to Add a Decoder) |
|||
Line 1: | Line 1: | ||
==How to Add a Decoder== | ==How to Add a Decoder== | ||
+ | ===Description=== | ||
+ | This is a guide for How to Add a Decoder. | ||
+ | |||
+ | ===Prerequisites=== | ||
+ | * DSS | ||
+ | * Connected network | ||
+ | * NVR/DVR | ||
+ | * Decoder | ||
+ | |||
+ | ===Video Instructions=== | ||
+ | <embedvideo service="youtube">X</embedvideo> | ||
+ | |||
+ | ===Step by Step Instructions=== | ||
'''Step 1.''' From the Main Menu select the General Tab ➞ Select Device ➞ Select Device ➞ Select Decoder ➞ Select Add | '''Step 1.''' From the Main Menu select the General Tab ➞ Select Device ➞ Select Device ➞ Select Decoder ➞ Select Add | ||
Revision as of 19:14, 1 September 2016
Contents
How to Add a Decoder
Description
This is a guide for How to Add a Decoder.
Prerequisites
- DSS
- Connected network
- NVR/DVR
- Decoder
Video Instructions
Step by Step Instructions
Step 1. From the Main Menu select the General Tab ➞ Select Device ➞ Select Device ➞ Select Decoder ➞ Select Add
Step 2. Input required info ➞ Select "Getting Info"
- Input device name ➞ Input Channel Amount ➞ Select OK.