Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "VideoLossAnalog"
(→I connect the general analog camera to the device, there is no video output.) |
|||
| Line 2: | Line 2: | ||
There are following possibilities: | There are following possibilities: | ||
| − | * Check camera power supplying, data cable connection and etc. | + | * Check camera power supplying, data cable connection and etc. There might not be sufficient power from the power source. You can use a voltage tester if you have one on hand. |
| − | * Check the length of cable run. | + | * Check the length of cable run. Refer to the specifications for the limitations on the cable length. |
* This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera. | * This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera. | ||
| + | * If there is no video, check the coax connection. Faulty connections will result in no video or intermittent video. | ||
[[Category:Troubleshoot]] | [[Category:Troubleshoot]] | ||
Revision as of 17:40, 1 September 2016
I connect the general analog camera to the device, there is no video output.
There are following possibilities:
- Check camera power supplying, data cable connection and etc. There might not be sufficient power from the power source. You can use a voltage tester if you have one on hand.
- Check the length of cable run. Refer to the specifications for the limitations on the cable length.
- This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.
- If there is no video, check the coax connection. Faulty connections will result in no video or intermittent video.
