Difference between revisions of "Troubleshoot/NVR/Display Troubleshoot"
| Line 3: | Line 3: | ||
* Check your physical connections from the system to the monitor. | * Check your physical connections from the system to the monitor. | ||
* If a VGA connection, ensure the screws are tight. | * If a VGA connection, ensure the screws are tight. | ||
| + | * If a DVI connection, also ensure the screws are tight. | ||
* On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable. | * On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable. | ||
| + | |||
[[Category:Troubleshoot]] | [[Category:Troubleshoot]] | ||
Revision as of 00:39, 27 April 2016
The displayed video is not full in the monitor.
- Please do the following:
- Check your physical connections from the system to the monitor.
- If a VGA connection, ensure the screws are tight.
- If a DVI connection, also ensure the screws are tight.
- On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable.
