Difference between revisions of "Troubleshoot/NVR/Display Troubleshoot"

Line 2: Line 2:
 
* Please do the following:
 
* Please do the following:
 
* Check your physical connections from the system to the monitor.
 
* Check your physical connections from the system to the monitor.
 +
* Check your aspect ratio.
 
* If a VGA connection, ensure the screws are tight.
 
* If a VGA connection, ensure the screws are tight.
 
* If a DVI connection, also ensure the screws are tight.
 
* If a DVI connection, also ensure the screws are tight.

Revision as of 19:07, 27 April 2016

The displayed video is not full in the monitor.

  • Please do the following:
  • Check your physical connections from the system to the monitor.
  • Check your aspect ratio.
  • If a VGA connection, ensure the screws are tight.
  • If a DVI connection, also ensure the screws are tight.
  • On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable.