Difference between revisions of "Troubleshoot/NVR/Display Troubleshoot"
| Line 5: | Line 5: | ||
* If a VGA connection, ensure the screws are tight. | * If a VGA connection, ensure the screws are tight. | ||
* If a DVI connection, also ensure the screws are tight. | * If a DVI connection, also ensure the screws are tight. | ||
| − | * If a HDMI connection, | + | * If a HDMI connection, 1080p monitor is recommended. |
* If a DP connection, make sure the monitor is at least 1080p. | * If a DP connection, make sure the monitor is at least 1080p. | ||
* On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable. | * On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable. | ||
Revision as of 16:37, 3 May 2016
The displayed video is not full in the monitor.
- Please do the following:
- Check your physical connections from the system to the monitor.
- Check your aspect ratio.
- If a VGA connection, ensure the screws are tight.
- If a DVI connection, also ensure the screws are tight.
- If a HDMI connection, 1080p monitor is recommended.
- If a DP connection, make sure the monitor is at least 1080p.
- On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable.
