Difference between revisions of "Troubleshoot/NVR/Motion Record Troubleshoot"
| Line 4: | Line 4: | ||
* Period setup is not correct. | * Period setup is not correct. | ||
* Motion detection zone setup is not correct. | * Motion detection zone setup is not correct. | ||
| + | |||
| + | [[File:motiontrouble6.png|500px]] | ||
| + | |||
* Sensitivity is too low. | * Sensitivity is too low. | ||
* Most third-party cameras will not have the full capabilities, like motion detection, to work. | * Most third-party cameras will not have the full capabilities, like motion detection, to work. | ||
Revision as of 16:18, 4 May 2016
Motion detection function does not work.
There are following possibilities:
- Period setup is not correct.
- Motion detection zone setup is not correct.
- Sensitivity is too low.
- Most third-party cameras will not have the full capabilities, like motion detection, to work.
- Check firmware.
- Default camera settings.
- Ensure motion detect set on the correct cameras.
- Ensure enable and record is checked off.
- Ensure Working Period is set up and settings are saved
