Difference between revisions of "Troubleshoot/NVR/Motion Record Troubleshoot"
(→Motion detection function does not work.) |
(→Motion detection function does not work.) |
||
| Line 1: | Line 1: | ||
===Motion detection function does not work.=== | ===Motion detection function does not work.=== | ||
There are following possibilities: | There are following possibilities: | ||
| + | * Sensitivity is too low. | ||
| + | * Most third-party cameras will not have the full capabilities, like motion detection, to work. | ||
| + | * Check if firmware of Recorder and IP camera is current. | ||
| + | * Ensure motion detect set on the correct cameras. | ||
| + | * Period setup is not correct. | ||
| + | |||
| + | [[File:motiontrouble8.png|500px]] | ||
| + | |||
| + | [[File:motiontrouble8.png|500px]] | ||
| − | + | ||
* Motion detection zone setup is not correct. | * Motion detection zone setup is not correct. | ||
| Line 9: | Line 18: | ||
[[File:motiontrouble7.png|500px]] | [[File:motiontrouble7.png|500px]] | ||
| − | |||
| − | |||
| − | |||
* Default camera settings. | * Default camera settings. | ||
[[File:motiontrouble5.png|500px]] | [[File:motiontrouble5.png|500px]] | ||
| − | |||
* Ensure enable and record is checked off. | * Ensure enable and record is checked off. | ||
Revision as of 18:22, 4 May 2016
Motion detection function does not work.
There are following possibilities:
- Sensitivity is too low.
- Most third-party cameras will not have the full capabilities, like motion detection, to work.
- Check if firmware of Recorder and IP camera is current.
- Ensure motion detect set on the correct cameras.
- Period setup is not correct.
- Motion detection zone setup is not correct.
- Default camera settings.
- Ensure enable and record is checked off.
- Ensure Working Period is set up and settings are saved
