Difference between revisions of "Troubleshoot/NVR/Display Troubleshoot"
| Line 13: | Line 13: | ||
* Monitor is incapable of displaying the device recorders resolution output. | * Monitor is incapable of displaying the device recorders resolution output. | ||
| − | [[file:BasicsTestImage1.jpg]] | + | Coaxial with BNC connector |
| + | |||
| + | [[file:BasicsTestImage1.jpg|400px]] | ||
[[Category:Troubleshoot]] | [[Category:Troubleshoot]] | ||
Revision as of 21:17, 11 May 2016
The displayed video is not full in the monitor.
- Please do the following:
- Check your physical connections from the system to the monitor.
- Check your aspect ratio.
- If a VGA connection, ensure the screws are tight.
- For the VGA connection, 25 feet or less is recommended for high resolution and 50 feet for lower resolution.
- If a DVI connection, also ensure the screws are tight.
- For the DVI connection, Up to 15 feet at high resolutions (above 1280x1024), or up to 50 feet at lower resolutions (1280x1024 and below)
- If a HDMI connection, 1080p monitor is recommended.
- For the HDMI connection, less than 50 feet is highly recommended with 25 feet or less is preferred.
- If a DP connection, make sure the monitor is at least 1080p.
- On the monitor check the current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080 or 1080P capable.
- Monitor is incapable of displaying the device recorders resolution output.
Coaxial with BNC connector
