Difference between revisions of "SmartPSS/Add Device P2P"

Line 1: Line 1:
 
==Setup Remote Access via P2P using SmartPSS==
 
==Setup Remote Access via P2P using SmartPSS==
 +
===Pre-Requisites===
 +
(Placeholder)
 +
===Video Instructions===
 +
<embedvideo service="youtube">https://youtu.be/0BimUZRYjhI</embedvideo>
 +
===Step by Step Instructions===
 
1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:
 
1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:
 
*On the underside or side of the unit
 
*On the underside or side of the unit

Revision as of 23:39, 28 June 2016

Setup Remote Access via P2P using SmartPSS

Pre-Requisites

(Placeholder)

Video Instructions

Step by Step Instructions

1. Locate the serial number of your NVR or DVR. The serial number can be found at the following locations:

  • On the underside or side of the unit

SmartPSSP2P3.JPG

  • In the web interface, under Info->Version
Error creating thumbnail: Unable to save thumbnail to destination
  • On the system interface under Main Menu->Settings->Network->P2P

SmartPSSP2P4.png

  • On the system interface under Main Menu->Info->System->Version

SmartPSSP2P5.png

2. Launch SmartPSS. (Default SmartPSS credentials are admin:admin)

Error creating thumbnail: Unable to save thumbnail to destination

3. Click, "Devices"

SmartPSSP2P7.png

4. Click, "Manual Add"

SmartPSSP2P8.png

5. Input the following:

  • Device Name:(Any Name)
  • Register Mode: SN
  • SN: (Your Device's Serial)
  • Group Name: (Any Group)
  • User Name: admin
  • Password: admin (Your NVR's Password)
Error creating thumbnail: Unable to save thumbnail to destination

6. Click, "Get Info"

Error creating thumbnail: Unable to save thumbnail to destination

7. Click, "Save and Continue"

Error creating thumbnail: Unable to save thumbnail to destination

8. After a few moments, SmartPSS will connect to the NVR and display as, "Online"

SmartPSSP2P12.png