Difference between revisions of "Template:NVR72 Series Back Panel"
(Created page with "===NVR72 Series=== The NVR72 series rear panel is shown as below. 500px {| class="wikitable" width="567" |- | colspan="2" width="212"| '''Name ''...") |
(No difference)
|
Latest revision as of 21:48, 1 July 2016
NVR72 Series
The NVR72 series rear panel is shown as below.
Name |
Function | |
USB2.0 port |
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. | |
Network port |
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable. | |
RS-232 |
RS-232 debug COM. |
It is for general COM debug to configure IP address or transfer transparent COM data. |
HDMI |
High Definition Media Interface |
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. |
VGA |
VGA video output port |
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. |
MIC IN |
Audio input port |
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup. |
MIC OUT |
Audio output port |
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
|
1~8 |
Alarm input port 1~8 |
|
GND |
Alarm input ground port. | |
NO1~NO3 |
Alarm output port 1~3 |
|
C1~C3 | ||
A |
RS-485 communication port |
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ. |
B |
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ. | |
Power input port |
Input DC 12V/5A. | |
Power switch |
/ |
Power on/off button. |