Difference between revisions of "PTZ Laser Settings"

Latest revision as of 18:59, 5 July 2016

How to adjust focus length

1. You will need to access the On Screen Display (OSD) of the PTZ in order to select the Focus Setup options.

2. Once in the FOCUS MODE settings you can set the camera's focus mode. It includes several modes such as auto, manual, semiautomatic:

500x500px

• FOCUS LIMIT: set the camera focus limit. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.

• FOCUS SENSITIVITY: set the camera focus sensitivity. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.

• ZOOM TRACKING: it is to set the camera zoom tracking, click the left/right button on the keyboard or in the speed dome terminal menu to set.

• LASER FOCUS CORRECTION: It is to set the camera laser focus correction. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.

• BACK: Go back to previous menu.

• EXIT: Log out system menu.

How to set laser length

1. You will need to access the On Screen Display (OSD) of the PTZ in order to select the Laser Settings.

2. Move the cursor to the LASER SETTING button and then click confirm button to set.

500x500px

• LASER SETTING RULE: It is to set the laser setting rule, there are two options: zoom priority and manual. Click “left”, “right” button to set.

• ANGLE: It is to set the laser angle, click “left”, “right” button to set.

Note: It is valid only when laser setting rule is set as manual mode.

• INTENSITY: it is to set the laser intensity, click “left’, “right” button to set.

Note: It is valid only when the laser setting rule is set as manual mode.

• BACK: Go back to the previous menu.